Skip to main content



STEEL TIE RODS



STEEL TIE RODS

Steel tie rods are versatile structural components used to resist tensile forces and maintain stability in various applications. They are commonly used construction for retaining walls, marine structures and sheet pile systems, as well as in bridges, industrial buildings, and architectural applications.

 

Tie rods can be provided in a wide range of carbon steel grades and stainless steel grades, there is also a wide range of tie rod end treatments, connections and fittings to suit your specification and requirements.

Forged End Dimensions

In addition to straight bar tie rod systems, to optimise the capcity and efficiency of tie rod systems, forged end tie rods with either an upset end thread or forged eye can be provided.

 

Tie rods can be supplied with any combination of forged or straight ends at each end; forged eye, forged upset end, or plain thread.

U Piles Table
Upset Thread Rod Shaft
Nominal Dia
(mm)		 Forged Eye
Size
A		 Length
L (mm)		 Hole Diameter
d0 (mm)		 Depth
E (mm)		 Thickness
T (mm)
M24X36520
M30X3.57525
M36X48530
M42X4.510535
M48X510540
M56X5.510545
M60X5.5125508214870
M68X6140558716170
M72X6145609217075
M76X6165659717880
M85X61707010718685
M90X61907510719390
M95X62108011220095
M100X62308511720995
M105X625090122225100
M110X627095127232105
M115X6285100132246110
T125X10290105137253115
T130X10300110142260120
T135X10310115147269125
T140X10320120152278130
T150X12325125157294130
T155X12330130162303135
T160X12335135167311135
T165X12340140172320140
T170X14345145177331140
T175X14350150182341140
T180X14355155187357140
T185X14360160192368145
T195X16365165197378145
T200X16375170202385150
T205X16375175207392155
T210X16380180212400160
T220X16385185217405160
T225X16395195222415160
T230X18395195227425160
T235X18400200232435160
T240X18405205237445160
T245X18410210242455160

Properties are representative of manufacturers data and may be subject to minor variation or change, additional order specific detail can be provided.

 

Alternate combinations of upset thread and bar diameter are available on request. 

DOWNLOAD

Load Capacity

The Load chart below compares the plain and forged thread end rod theoretical capacity. This is based on tread and bar diameters above, however we can change the combination of thread diameter and bar diameter to suit the engineers’ requirements. Contact us if you require additional information for your application.

Z Piles Table
Nominal Dia.
of Shaft		 Strength Grade (MPa)
345 MPa 460 MPa 550 MPa 650 MPa
Plain Forged Plain Forged Plain Forged Plain Forged
2084108113144135173159204
25122169162206194270229319
30193244258325308356354459
35239332319442381529431625
40336433449578536681645816
454505485737367118748721038
5050867767790386610799471276
556068198031092966130411421547
6070297593313201116155513191851
659231144120015661471181417352156
7010541327140517831680212619382500
7511931523159120311902242922482876
8013411733177822992138274325273287
8514981977198025952388308028293661
9017062194227529252720343732144133
9519282444254032993113389736224670
10021632723286437123448438640545268
10524122986321639963845471045455626
11026743277356443964236522450386174
11529503582393647764703570956047048
12032403900431952025165627661687543
12533144232441956425283671664247978
13036204577482761035771726768218623
13539404936515465816291782974059099
140428453086198707868138462802510023
145462156946451759273369078870510798
150484460946459812577339714912711481
1555136653771518674831110353984912264
16055966933746192448921110531054313092
16560527373785998319656117751126913962
1706491782783551044110252125641200514877
1756646829488181105910624132281265615636
1807096877594611156911312139901350916522
18574019279100541239612022147771420817403
19077549726105771303112750156561507218402
195820310283111571377413220164171562419402
200872810833116981439313987173231656420413
205927611383123571517414775181401763421443
210977611943130341592515544190491841822502

Properties are representative of manufacturers data and may be subject to minor variation or change, additional order specific detail can be provided.

DOWNLOAD

Components + Other Products

TIE ROD COMPONENTS

  • Hexagonal and Spherical Nuts
  • Bearing plates for bearing against sheet pile, concrete wall or waler beam.
  • T Plates and T anchors for connection to H Piles or tubular steel piles.
  • Couplers and turnbuckles for joining and adjusting tie rod lengths.
  • Linking plates for joining eye ends
  • Bi directional articulated joint allowing movement in any direction.
  • Wailing and wailing bolts

 

  • Architectural Tie rod components also include;
  • Fork end pin connections
  • Sheaths to cover and protect threads.

COATING SYSTEMS

Tie rods can be supplied with HDG coating wraping painting and other combinations of the same, please submit your specification requirements for review.

Work With Us

Let Kephix provide the expertise and materials you need to make your next project a success. Our team is ready to help you navigate challenges, save costs, and keep your project on track.

PHONE: +61 4 4713 4863      |      EMAIL: [email protected]

    Full Name:

    Company:

    Email:

    Phone:

    Enquiry:

    Strategic guidance to optimise sourcing, streamline sales processes, and reduce supply chain risk.